Plenty of homes still have the wood door or the extension-spring setup they were built with. Those doors deserve someone who knows them: how to true a sagging section, add safety cables, and bring the hardware up to date without losing the character.
From the shop
Every door we touch leaves with its safety features working. That means photo-eyes aligned and clean, the auto-reverse force set correctly, the emergency release working and the door balanced so it can be lifted by hand. We show homeowners the monthly test they can do themselves, because a door is safest when someone is checking it.
— Del Ray Garage Door Experts
Hours
Garage door services
Garage doors rarely fail all at once. They give hints first, and this list is arranged around those hints. Match the one you have noticed and you will see what the visit involves and which parts are usually behind it.
Repairs
Long-lasting doors are not lucky, they are looked after. This category holds the services that do the looking after: adjustments, part replacements, seal renewal and the periodic inspection that ties them together.
Springs
A well-set spring system means the door will stay wherever you leave it, half open included. That is the standard we work to on every spring and cable job.
Openers
If the light on the opener blinks and the door refuses to close, the sensors are usually telling you something is in the way or they cannot see each other. Cleaning, re-aiming or replacing them is a small job with a big effect.
New Doors
Windows in a garage door bring daylight into a space that is often dark. Adding glazed sections to an existing door, or choosing a full-view glass door for a workshop or studio, is part of what we do here.
Insulated Steel Garage Door Installation
Wind-Rated Garage Door Replacement
Carriage-House Garage Door Installation
Full-View Glass Garage Door Installation
New-Construction Garage Door Installation
Commercial Sectional Door Repair
Commercial Rolling Door Repair
High-Lift Garage Door ConversionToronto
Garage Door Opener Replacement
Press the button and the motor hums, but the door stays exactly where it is. Under the housing there is a dusting of white plastic shavings, the sign of a stripped drive gear, and this is the second time it has happened.
Garage Door Opener ReplacementUsuallySafety inspection.
WhyA full check of springs, cables, rollers, sensors and balance, with a plain report of what is wearing.
UsuallyTune-up.
WhyLubrication, hardware tightening and balance adjustment restore a door that has simply been neglected.
UsuallyReplace both springs.
WhySprings on the same door age together; replacing the pair keeps the balance even and saves a second visit.
UsuallyWind-Rated Garage Door Replacement
WhyAn exposed garage can experience both wind pushing the door inward and suction drawing it outward.
UsuallyCarriage-House Garage Door Installation
WhyA heavier decorative door may need a different spring specification, stronger section reinforcement or another opener arrangement than the former door.
UsuallyFull-View Glass Garage Door Installation
WhyHandover is an important part of a glazed-door installation because the surfaces and mechanism need different kinds of care.
Open 24/7
Most of the noise a garage door makes comes from its rollers. Steel wheels on a steel track are loud by nature and grow louder as their bearings dry out and pit, and the plastic wheels fitted to many new doors have no bearings at all, so they simply grind as they wear.
1 of 3
Phone or form, whichever suits. Mention any unusual sounds, how long the trouble has gone on and whether the door still moves.
2 of 3
Springs, cables, drums, bearings, rollers, hinges, tracks and the opener drive are each checked, because a fault in one shows up in another.
3 of 3
The repair is completed with new parts, the door cycles several times under observation, and the workspace is cleaned before we go.
Toronto, Ontario
2021 census · what it means at the door
58%Older homes
About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.
Older garages are frequently used as workshops or storage as much as parking, which means the door opens many times a day and collects dust on the sensors. Sealed rollers, protected photo-eyes and a tune-up schedule suit that pattern well.
23%
Single-detached houses make up about 23% of homes in Toronto (2021 Census).
Townhouse and condo owners often share responsibility for the door with a board or property manager, so we provide a clear written report after each visit: what was found, what was replaced and what is likely to need attention next, ready to pass along.
A lubricant made for garage doors, applied lightly to hinge knuckles, roller stems and the springs, following the door maker's own recommendation, since the right product and whether bearings are included varies by manufacturer. General-purpose penetrating oils are thin and wash away, and heavy grease attracts grit. Nothing goes on the track raceway or on a nylon or plastic wheel. The opener's chain or screw rail may take a lithium grease according to its manual, and the manual for your door names what its maker prefers.
Industry guidance suggests a monthly visual and listening check by the homeowner, with the door closed and then in motion, and a yearly visit from a trained door systems technician who goes over springs, cables, rollers, hinges, track, balance and the opener's safety functions. Rollers themselves are worth a look twice a year, and they belong on the list whenever springs or cables are being replaced. A door used many times a day earns more frequent attention.
The curve is where each roller changes direction under load, so it exposes wear that straight travel hides. A wheel worn oval or flat-spotted bumps as it turns the corner, a wobbling stem lets the section lean back as it enters the horizontal run, and a track whose radius has been knocked out of shape pinches or drops the wheel for an instant. Fresh rollers of the right size in a track that has been checked for shape and spacing usually take the shudder away.
A spring that is intact but has relaxed slightly can be given a little more tension, within limits, to restore balance; this is a normal adjustment on a door that has settled. A spring with a broken coil is replaced as a unit, since the wire has reached the end of its life. The technician checks the condition of the steel and recommends whichever restores a balanced, safe door.
Often the opener believes something is in the doorway, which happens when the receiving sensor stops seeing the beam, whether from an object in the path, a bracket knocked out of line, a dirty or frosted lens, sun in the receiving eye, or a damaged wire. Binding, a force setting or the door arm can cause the same symptom, so the sensor lights and the opener's flashing pattern are read first, and the technician fixes the cause they point to rather than guessing.
On-site assessment preferred
Talk to a technician. Book a visit.
Open 24/7 · same fees any hour
On-site assessment preferred · (289) 514-9286 · open 24/7
